The 20 Essentials for Every Fly FisherPublished on 08/09/2022 · 14 min readFly fishing Expert Rylyn S. details all the gear you'll need before hitting the river for some fly fishing, plus some extras that are nice to have but not necessary!
Photo by Glen Rushton
As a Fly Fishing Expert here at Curated, the situation I hear most often from visitors is, “I am a beginner to fly fishing and I am overwhelmed by all the equipment out there. Where do I even start?”
To most, fly fishing is quite intimidating. To some, it might even look a little ridiculous. From the fancy bobbers that we call “indicators' ' to all of the numerical attributes for tippet, leader, fly sizes, rod weight, length…it’s a lot. It can make you feel like you need a Ph.D. in calculus to figure all of this out!
Oh, and that’s not even mentioning the odd names like the wooly bugger, bunny leech, muddler minnow, and the zonker given to the piece of feather or material tied onto a hook with thread!
With all the innovation and technical options, fly fishing can seem quite confusing. In this guide, I will break down the 20 essentials every beginner fly fisherman needs.
Wants vs. Needs
1. Fly Rod
Before selecting a rod we must discuss what you are fishing for and where you are fishing. Are you fishing small creeks? Are you fishing large rivers? Are you fishing fresh or saltwater?
A fly rod is categorized in weight (WT) which ranges from 0 to 16, with the 0 weight as the weakest and the 16 weight as the strongest. Fly rods also vary in length which really has to do with what and where you are fishing. Check out this chart for helpful tips for selecting your first fly rod.
My recommendation is choosing a 5wt, 9ft fly rod if you’re starting out. This is a great starting point as it can cover a range of species and the majority of freshwater applications.
As far as the “best bang for your buck,” choosing a fly rod outfit is the best bet as it comes completely set up and ready to fish with the rod, reel, backing, fly line, and leader (sometimes even a case). Check this one out!
2. Fly Line
Fly lines are categorized in weight just like the fly rod. When choosing your fly line, a general rule is to match the weight of the rod with the weight of the fly line. So, if you have a 5wt 9ft fly rod, you’ll need a 5wt line.
Because most flies weigh just about nothing, it is actually the fly line that you are cast to launch the fly toward the fish. Your fly and leader go where the fly line goes.
There are numerous types of fly lines out there, from floating, sinking, intermediate, indicator, streamer, bass, and saltwater…But the good news is that 95% of anglers, including myself, use a weight-forward (WF) floating (F) fly line. Being weight-forward means that the taper of the fly line consolidates the weight toward the end of the fly line where the leader is attached. So when a fly line is labeled WF5F it means that it is weight forward, 5 weight, and a floating fly line.
3. Fly Reel
Some may be thinking, “why in the world would you say the fly reel is the third most important aspect of beginning fly fishing?” Well, let me break the news to you. The reel (in most cases) is just a tool to hold your backing and fly line. If you are going to spend your money, spend it on a good fly rod and a good fly line. The reel is just there to hold the rest.
When selecting your fly reel, match the fly reel weight (WT) with the weight (WT) of the fly rod. For instance, if your fly rod is a 5WT 9’0” fly rod, you will need a 5-6WT reel. Depending on the company, these are labeled differently. For example, Lamson Waterworks label their reels -3+, -5+, -7+, etc. This means that the fly reel in the -5+ range is compatible with a 4WT-6WT fly rod. It can be a little confusing, but a Curated Fly Fishing Expert can help!
The drag system on fly reels will help you reel in larger fish, but when landing a fish, it is mostly done by stripping the line back through the fly rod guides and letting the line float downstream. Notice in the picture below how the fly line is simply floating. Once you are finished fishing a location, you can reel the fly line back up with your fly reel
Backing is basically string. Well, it may be just a little fancier than that! It is actually a braided dacron, like this. The backing is loaded onto your fly rod before the fly line for two purposes:
- Takes up space on your fly rod because most fly lines are not very long (90-100 yds). This extra material also allows the arbor (the diameter of the reel) to be larger so that each turn of the reel brings in more line.
- Your insurance policy. If you get lucky and hook into a massive fish that takes you for the ride of your life, you will have plenty of backing to “back you up.” Generally, you will have anywhere from 150 to 200 yds of backing behind the fly line. This is also determined by reel specs which are mentioned in their description.
5. Tapered Leaders
The tapered leader is what connects your fly to your fly line. This is a clear piece of nylon, monofilament, or fluorocarbon. Generally, most fly fishermen use nylon leaders as they are more versatile. Nylon and monofilament float, which is great for those dry flies (flies that float on the surface of the water) while fluorocarbon is great for nymphs (below the surface), but we will get to flies later.
- 40% of the leader is the “butt section” - the thicker section
- 20% of the leader is the “tapered section” - tapers from a thicker diameter to a smaller diameter
- 40% of the leader is the “tippet section” - this is the thinnest section of your leader.
The leader is tapered for two reasons:
- To transfer the energy efficiently back to the rod. If you had just the thinnest section tied throughout the total 9’ leader length, chances are you will break off. With the transfer of that energy being mostly in the butt section, you are able to land and fight fish easier without worrying about breaking off or losing that fish.
- Fish can be easily spooked. The leader allows for the tippet section to be virtually invisible to the fish.
The general recommendation is to match the length of your leader to the length of your fly rod. So, a 9 ft leader is great for a 9 ft rod.
Tippet is the thinnest section of the leader system, as explained above. When you get your leader straight out of the package, it is ready to fish! As you change flies and/or break flies off, your leader will get shorter as the day goes on. To make up the needed length, tie on more tippet material. Remember, a good ruler is your rod! If the leader is not the same length as your rod, you probably need more tippet material added.
When picking out your tippet, you'll primarily be choosing between nylon or fluorocarbon.
- Pros: Floats, holds knots really well, and is less expensive
- Cons: Because it floats, it’s not the best for some setups like strictly nymphing
- Pros: Sinks, very strong, super abrasive-resistant
- Cons: Harder material which makes knots harder, expensive
There are five main types of flies which I will explain in-depth below.
Of the five types, this has to be my all-time favorite. Dry flies imitate anything and everything that lives on top of the water's surface. They are generally designed to float on the water (and when they don’t, it is super annoying, but that’s where floatant comes in handy, as we’ll discuss later!).
To fish dry flies, cast out your fly on a floating line. If you’ve done it right, it should sit on the surface of the water. Aggressive predatory species, such as trout, spend a great deal of time looking up for (real) flies landing on the surface. When they spot one, they swim up and sip the fly out of the surface.
Dry fly fishing is super visually stimulating and exciting. There’s nothing that gets your heart racing faster than watching your little dry fly drifting along before a trout rises up and smashes it!
Confused about what counts as a dry fly? Don’t be. Here’s a simple rule of thumb: if your fly is designed to be fished on the surface, it is a dry fly.
Wet flies are designed to be fished sub-surface. They can be made to replicate a host of different species. You’ll be able to tell what some are designed to look like, but others can be a little more obscure!
Here’s the good news. To fish wet flies, you don’t have to have a sinking line. 90% of flies can be fished on a floating line.
Here are some things that you’ll find represented in a wet fly:
- Small baitfish and fry
- Drowned insects
Nymphs deserve their own category. Why? Oftentimes they are grouped with wet flies, but nymphs make up the bulk of a trout’s diet. A nymph is a fly representing an insect in its larval stage of life. Nearly all flying insects start as a nymph before transforming into their adult stage.
Here are a few that lay their eggs in water:
- Salmon Flies
- Daddy Longlegs
- Mosquitoes and midges
Streamers are another “wet fly” but have a few features that allow them to be in their own group:
- Streamers tend to be tied on larger hooks.
- They have a substantial tail that is mobile.
- Often have a weighted bead head.
Streamers often imitate baitfish which are great for targeting those larger fish. Remember this…all fish eat other fish. If the above three fly types do not work, throw on a streamer!
Attractor flies are a hybrid of sorts. They are basically a mashup of different fish-like elements, all tied into one, easy-to-eat package. Attractors, as the name suggests, are designed to get the fish’s interest. Here are some key features that tend to do exactly that:
- Moving wiggly legs
- Bright colors
- Bushy tails and bodies
- Large eyes
- Even cupped head to make a “popping” sound on the water when stripping back.
When getting started, I recommend getting a fly assortment specifically for your target species that has a range of flies in the categories mentioned above. A small fly box with 10-20 flies is a great starting point for any beginner.
8. Fly Box
These are used to easily cut tippet, leaders, and line. Some even have an eye-clearing needle to clean the eyes of your hooks from glue, adhesives, or those pesky little knots that you can’t seem to clip off.
10. Pliers or Forceps
Forceps and pliers are used to easily remove hooks from your fish without causing too much stress on the fish. They can also be used to mash down the barbs of hooks and for smashing down split shots to your leader for added weight.
11. Strike Indicators
Remember those nymphs we talked about? Some of those tiny little fellas are going to make it hard for you to see or feel a strike from the fish. You can ease the challenge by adding an indicator (a glorified bobber) to indicate your strike (see where the name came from?).
They come in a variety of options. For instance, the wool indicators below are made for more delicate presentations. Rather than having the splash from a round bobber, you have a delicate presentation like that of a dry fly.
The shapes are really your preference. If I am fishing spring creeks, I prefer to use a wool indicator as I primarily use smaller nymphs. The round bobber is great for big rivers and for throwing larger nymphs like stoneflies and jigged flies.
12. Split Shot
These little boogers can make the difference between catching fish and not! Trout and other stream or river fish tend to live towards the bottom. By adding split shots, you can get your flies down into what we call the “strike zone.” It is extremely important to bring your flies to where the fish are feeding in order to catch fish. I personally recommend carrying a variety pack of split shots with a range of weight sizes.
Although flies are made from materials that float, they usually are unable to float for an extended period of time. When fishing with dry flies, you will need to apply floatant. This causes the fly to expel water much faster and will keep your dry fly floating longer in the water which allows the fly to float downstream naturally. Think about this—if it doesn’t float like what it’s supposed to imitate, the fish are less likely to eat it. Floatant can come in many different forms like powder, a spray, and a silicone gel; but I personally prefer the gel.
14. Tippet Holder
The tippet holder is a great addition as it keeps your tippet spools organized and from getting all tangled in your pack or vest. This also allows for efficiency when selecting the right tippet material for your given fishing situation.
Retractors/Zingers can be applied to your tools to keep them accessible yet out of the way when casting and/or netting fish. You may attach nippers, pliers, scissors, floatant, and even your net to these for a safe attachment to make sure tools do not end up as shiny objects beyond reach at the bottom of the river!
Technically you can land a fish without a net, but I consider it to be a great addition to any quiver. My suggestion would be to buy a net with silicone netting. This is much easier on the fish and keeps hooks from getting tangled.
Looking for a net of your own? Read more in this buying guide.
17. Net Release
A net release is a magnetic mechanism that allows you to easily stow away your net on any wader, pack, sling, or belt.
18. Pack or Vest
While having a pack or vest makes it easy to stow away all your gear, it is not necessary. Get a pack or vest if you plan on spending most of your day on the water. You can easier stow away fly boxes, tippet, extra leaders, indicators, tools, and extra spools in your day pack.
19. Polarized Sunglasses
These are often forgotten by beginning fly fishermen. Polarized sunglasses reduce surface glare on the water making it easier to spot fish and obstacles in the water. Also, keep in mind that these will protect your eyes from hooks and from the sun while out on the water.
20. Waders and Wading Boots
If you are new to fly fishing, I recommend you wait to purchase a new pair of waders and wading boots. Go try wet wading first (unless it’s winter) to see if this is for you! If you decide to stick with it, grab yourself a good pair of waders and wading boots.
Some may ask, why are the boots separate from the waders? Will my feet get wet?
The answer to this question is no! The waders themselves are completely sealed. As a matter of fact, the wader stocking feet are neoprene which makes for a comfortable sock to slip into those wading boots. Wading boots provide needed support while out on the water, unlike boot-foot waders. Think of them as a good pair of hiking boots vs. having on-water (mud) boots.
Well, congratulations! You made it to the end of “The 20 Essentials for Every Fly Fisher.”
The needs are the “bare necessities,” which are needed to get you on fish and having the time of your life.
The wants make having the time of your life just a little easier. They keep you dry, make your gear accessible, and make your fly fishing experience even more enjoyable.
Are you looking to get into fly fishing, but still aren’t sure where to start? Come talk to one of our Fly Fishing Experts. We would be glad to help you. Here at Curated, we are guides, teachers, instructors, and everyday fly enthusiasts. We live and breathe this thing we call fly fishing.